NBR/NR Cone Rubber Fenders 1200H PIANC2002 Tear Resistance Dock Marine Bumper
Description
Cone rubber fenders systems can be used to berth a range of ship types, including not only ro-ro, tankers, cruise ships, but also container and bulk terminals, general cargo facilities, etc. The advanced features of the cone fenders improve the material handling capacity of the deck/ship crane, thereby reducing the overall cost of the project.
For superior wear and abrasion resistance, cone rubber fenders can also be equipped with a front frame with low-friction fascia pads to reduce shear and hull pressure. Cone fenders can be installed in a single, dual or multiple configuration with a common front frame to optimize performance characteristics. These moats are equipped with long steel frames to provide a larger vertical contact area for ports with large tidal changes.
Specifications
| Material |
Silicone Rubber, Natural rubber, EPDM, NBR, FKM, PU, etc |
| Product Name |
NBR/NR Cone Rubber Fenders 1200H PIANC2002 Tear Resistance Dock Marine Bumper |
| Size |
DF-H1200 |
| Shape |
Cone Type |
| Color |
Transparent, black, white, any pantone color is available |
| Temperature range |
-40℃~300℃ |
| Hardness |
50 shore A~80 shore A |
| Feature |
High temperature resistant; tear resistant, wear resistant; oil resistant; etc |
| MOQ |
1 Piece |
| Sample |
Available |
| Delivery time |
Normally 3-5 days |
| Model |
H |
h |
F |
D |
Q |
W |
d-m |
d-n |
| Cone |
[mm] |
[mm] |
[mm] |
[mm] |
[mm] |
[mm] |
[mm] |
[mm] |
| DF-300H |
300 |
13.5 |
255 |
450 |
195 |
405 |
M16 |
20 |
| DF-350H |
350 |
25 |
300 |
570 |
235 |
510 |
M20 |
25 |
| DF-400H |
400 |
18 |
340 |
600 |
260 |
540 |
M20 |
25 |
| DF-500H |
500 |
25 |
425 |
750 |
325 |
675 |
M24 |
30 |
| DF-600H |
600 |
27 |
510 |
900 |
390 |
810 |
M24 |
30 |
| DF-700H |
700 |
32 |
585 |
1050 |
455 |
945 |
M30 |
38 |
| DF-800H |
800 |
36 |
680 |
1200 |
520 |
1080 |
M36 |
44 |
| DF-900H |
900 |
41 |
765 |
1350 |
585 |
1215 |
M36 |
44 |
| DF-1000H |
1000 |
45 |
850 |
1500 |
650 |
1350 |
M42 |
56 |
| DF-1050H |
1050 |
55 |
1030 |
1680 |
900 |
1530 |
M36 |
44 |
| DF-1100H |
1100 |
50 |
935 |
1650 |
715 |
1485 |
M42 |
50 |
| DF-1150H |
1150 |
52 |
998 |
1725 |
750 |
1550 |
M42 |
56 |
| DF-1200H |
1200 |
54 |
1020 |
1800 |
780 |
1620 |
M42 |
50 |
| DF-1300H |
1300 |
59 |
1105 |
1950 |
845 |
1755 |
M48 |
60 |
| DF-1400H |
1400 |
66 |
1190 |
2100 |
930 |
1890 |
M48 |
60 |
| DF-1600H |
1600 |
72 |
1360 |
2400 |
1060 |
2160 |
M48 |
70 |
| DF-1800H |
1800 |
78 |
1530 |
2880 |
1190 |
2430 |
M56 |
76 |
| DF-2000H |
2000 |
80 |
1900 |
3200 |
1540 |
2920 |
M56 |
76 |
Installation Accessories
Front Panel: Reduces surface pressure and avoids damage to fenders and boats.
Face Panel: Reduce the coefficient of friction to protect the hull. Ultra-high molecular weight polyethylene.
Pre-installed Bolts and Nuts: Used to secure the fender to the dock. 1Cr18Ni9Ti, SUS304, SUS316 stainless steel or Q235 hot dip galvanized.
Preset U-Rings: Secure the chain. Q235 painted or hot dip galvanized.
Anchor Bolt: Connect accessories such as fenders and front panels. Stainless steel (or hot dip galvanized).
Weight Chain: Supports the front panel to avoid sagging. 1Cr18Ni9Ti, SUS304, SUS316 stainless steel or Q235 hot dip galvanized.
Tension Chain: When the lower part of the fender is stressed, it limits the deflection of the fender. Q235 hot dip galvanized or painted.
Shear Chain: Prevents shear deformation of the fender system. Q235 hot dip galvanized or painted.
Features
1. Excellent Geometrical Efficiency
2. Excellent performance at a wide range of berthing angles
3. Good Shear Resistance
4. Wide range of rubber grades and compounds for various applications
Applications
● Ferry, RoRo, and Cruise Ship Terminals
● Marine/Navy Terminals
● Container Facilities and Cargo Terminals
● Sea oil refineries terminals
Your message must be between 20-3,000 characters!
